Resources for Historic Homeowners
#7 Peeling Paint Looks Shabby
"I have been told a paint job on my house built in 1900 will only last about 5 years. Yikes! Is this true? Some experts and non-experts are telling me to use a solid body stain over the existing paint. There is a lot of flaking paint. The idea is that the remaining paint will flake regardless of whether I paint or stain, but by using stain, I will eventually reduce the amount of scraping required. If I do stain, what about that pesky edge where the paint flaked? Will wood putty smooth that edge under stain. Will the stain look OK over wood putty? What about using a grinder to remove the paint and then stain? It seems like that is about the same amount of work as scraping, but then I won't have to scrape again." Marty W. in Maine
Recently many of my clients have been "up in arms" because their last paint job looked shabby after only four to six years. Working together we have figured out why this is happened and what to do about it. First a few basics about paint:
How Paint Works
The solvent, binder and pigment are mixed to form liquid paint. When a coating of paint is spread out on the surface the solvent evaporates and the binder glues the pigment particles together and bonds them to the surface.
Depending on the materials and formulations used a coating can have different functions and characteristics:
These coatings work together forming a coating system. The result is a thin film that protects the wood surface from sun and moisture. The film is somewhat flexible so it will move along with swelling and shrinking of the wood which occurs due to inevitable changes in moisture content of the wood. The film also decorates the surface, changing its appearance.
Traditional "Oil Paint"
Maintenance of this coating system was simple: when the film was mostly weathered away the loose pigment was brushed off the surface and a new coating applied. This paint penetrates very well so the porous surface was consolidated and cracks in the old paint film were effectively filled, sealed and "healed." This had to be done every 20 to 40 years. Sometimes only weathered parts of the building were repainted such as towers, lower walls and porches. The result was little buildup of paint coatings on the surface.
Traditional oil paints kept a building looking clean because any dirt weathered away with the surface and the lead pigment prevented growth of mildew and algae.
Post War Construction Boom
The new "improved" paints had alkyd binders which were more flexible and very resistant to weathering. It was the perfect paint for the bare wood surfaces on all the new houses being built, but not so good for older buildings. Here's why:
Then lead pigment was eliminated from the new paint allowing mildew and algae to grow on the surface. Increased auto traffic exhaust with sticky hydrocarbon dust began to soil buildings more than in the past. Result: dirty looking buildings, leading to more frequent and complete repainting instead of the traditional practice of painting only where the paint was weathered away.
IMPORTANT POINT #1: Recoating began taking place about every 15 years, and EXCESSIVE paint buildup resulted, which is a new condition that never existed before. This new thicker paint film system is not flexible so it cracks. Moisture penetrates the cracks soaking the wood beneath. As the moisture tries to escape it can not get through the paint and it pushes the paint right off the wood. Increased shrinkage of the outer layers of the paint film force the film to curl away from the wood and the film breaks down where it is weakest: right next to the wood. Result: paint peeling down to bare wood.
IMPORTANT POINT #2: The fundamental cause of the problem: paint materials changed, but the maintenance method did not. Full recoating of the entire building continued, more and more frequently. This was great for the paint industry: selling and applying more and more product. Clearly, it was not the best treatment for older buildings. Exterior stains have been used in the past with some success, but even stains create paint buildup, especially the so called "solid stains" which may act more like paint than stain. We have developed two approaches for the solution to this problem. Frequently both are used on different parts of the same building.
Spot Paint Maintenance Program
Every three to five years the paint surfaces are cleaned, loose paint is knocked off and the bare wood in these spots is primed and painted. There is no attempt to feather the thick edge of heavy paint buildup since it will do little to extend the life of the work. Relatively weak "oil-based" primers and paints are used. Matching the color and sheen of the surrounding paint is important. This is a relatively low cost treatment, but it must be repeated for as long as there is heavy paint buildup that is peeling off. Lead containing waste material does not usually require costly special handling and disposal since relatively smaller amounts are generated, although you will still want to handle and dispose of them responsibly. The continuing cost of this treatment over the long-term might be higher than complete removal. Typical costs are $5. - $11./sq.ft. with only 20-30% of the exterior needing treatment.
Complete Paint Removal and Recoating
We often limit complete paint removal to areas with difficult access such as towers where long-term performance is needed and on areas where appearance is important such as at front doorways.
John Leeke is a preservation consultant who helps homeowners, contractors and architects understand and maintain their historic buildings. You can contact him at 26 Higgins St., Portland, Maine, 04103; or by E-mail: johnleeke@HistoricHomeWorks.com; or log onto his website at: www.HistoricHomeWorks.com
Live Video Conferences & Replays:
Historic HomeWorks Forum:
© John Leeke